Differences

This shows you the differences between two versions of the page.

--- mcmaster:intel:80c386i [2017/09/19 05:49] – mcmaster
+++ mcmaster:intel:80c386i [2024/01/27 05:19] (current) – external edit 127.0.0.1
@@ Line 38: / Line 38: @@
 </code>
-[[https://siliconpr0n.org/map/intel/80c386i/mz_mit5x/|MZ @ mit5x]]
+[[https://siliconpr0n.org/map/intel/80c386i/mcmaster_mz_mit5x/|MZ @ mit5x]]
-  * [[https://siliconpr0n.org/map/intel/80c386i/single/intel_80c386i_mz_mit5x.jpg|Single]] (4858x4389, 7 MB)
+  * [[https://siliconpr0n.org/map/intel/80c386i/single/intel_80c386i_mcmaster_mz_mit5x.jpg|Single]] (4858x4389, 7 MB)
-[[https://siliconpr0n.org/map/intel/80c386i/mz_mit20x/|MZ @ mit20x]]
+[[https://siliconpr0n.org/map/intel/80c386i/mcmaster_mz_mit20x/|MZ @ mit20x]]
-  * [[https://siliconpr0n.org/map/intel/80c386i/single/intel_80c386i_mz_mit20x.jpg|Single]] (19475x17576, 110 MB)
+  * [[https://siliconpr0n.org/map/intel/80c386i/single/intel_80c386i_mcmaster_mz_mit20x.jpg|Single]] (19475x17576, 110 MB)
 There's a little blob on it left side. I didn't realize the lid was aluminum (assumed it was steel) and so my magnet trick didn't work and I heated the die for longer than I intended to. I think some metal sputtered onto the die and caused that.
+{{https://siliconpr0n.org/map/intel/80c386i/single/intel_80c386i_mcmaster_mz_mit20x_2.thumb.jpg}}
+[[https://siliconpr0n.org/map/intel/80c386i/mcmaster_mz_mit20x_2/|mz_mit20x_2]]
+  * [[https://siliconpr0n.org/map/intel/80c386i/single/intel_80c386i_mcmaster_mz_mit20x_2.jpg|Single]] (29472x26752, 168.942MiB)