Silicon Pr0n

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{tag>collection_FelineFriendly vendor_bosch year_1996 foundry_unknown tech_unknown}}

====== Description ======
This part was taken from a Motronic M1.7.3 engine control unit (ECU), which was commonly used on 1.6L & 1.8L 4-cylinder BMWs of the mid-E36 generation. While this chip was likely used on a number of ECUs, the specific one in this case had Bosch PN 0 261 203 661.

This chip is believed to be a Philips 74HC4066 quad bilateral switch. Functionally, it is used to switch control signals to the Bosch b30098 knock signal processor, as well as switching the b30098's conditioned analog outputs when they need to be supplied to the ECU MCU's ADC inputs.

====== Package ======
Label (top):

<code>
57803 (Bosch internal PN)
A31080ME
Hnn9604 D
Thailand
[Philips Logo]
</code>

{{:felinefriendly:bosch:b57803:s253_pkg.jpg?400|}}

====== Die ======

<code>
Decap Steps:
(Bic lighter + water quench) x 2 cycles
Selective crushing with pliers and bench vise

Capture Details:
Imaging device: Keyence VHX-2000
Magnification: 1000X

Markings:
LT 705D
</code>

{{:felinefriendly:bosch:b57803:s253_die_normallight_1000x_small.jpg?400|}}

//Note: This is a ~4X downsampled version of the original image. A full resolution version (7MB) can be provided. On the to-do list...//