“This week we are presented with the MAX274 from Maxim (thanks again Neil!). This is an older low-pass filter IC and it should be noted that it requires substantial external components. The on-chip capacitor design is an interesting island pattern, it is possible that the inductances of the traces that link up the squares are also integrated into optimizing the design.

A quick reminder about the file naming scheme: the 10x means that the 10x magnification objective was used in addition to another 10x magnification in the optics. This means that a file name with 10x in the name is actually 100x and 20x is 200x. I know it might be slightly confusing, however, I don’t know if I should change at this point given that I used this poorly designed naming convention for all previous posts.”

Source: http://microblog.routed.net/2008/03/14/ic-friday-maxim-semis-max274/

Package



Die



 
nico/nat-semi/max274.txt · Last modified: 2017/12/21 06:58 (external edit)
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki