Differences

This shows you the differences between two versions of the page.

--- decap:start [2012/01/28 23:43] – mcmaster
+++ decap:start [2018/09/20 16:22] (current) – [Misc] mcmaster
@@ Line 1: / Line 1: @@
-Decapsulation is the process of removing or exposing a die from a package.
+{{gallery>:mcmaster:cob.jpg}}
+Decapsulation is the process of removing a die from or exposing a die in a package.
+Depending on the carrier type, different techniques need to be used.
+====== Epoxy ======
+{{mcmaster:decap:epoxy:trim:package_top.jpg?300}}
+[[epoxy|Main article]]
+In order to protect the fragile die, epoxy is mechanically strong and very chemical resistant. Strong chemicals, mechanical abrasion, or heat treatments can be used to remove epoxy. This is the most common packaging and possibly also the hardest.
+====== Ceramic ======
+{{mcmaster:decap:glass_frit:quick_before.jpg?300}}
+[[ceramic|Main article]]
+Fired ceramic with metal parts. Often sealed with glass and metal.
+====== Can ======
+[[metal|See metal]]
+Some packages are fully metallic. Usually these are transistors, but military ICs also came (still do?) in these as well.
+====== Plastic ======
+[[plastic|Main article]]
+Typically used for smart cards.
+====== Misc ======
+https://events.ccc.de/congress/2014/Fahrplan/system/attachments/2512/original/Uncaging_Microchips-Marcus_Janke_Peter_Laackmann.pdf
+  * Covers misc decap ranging from crude mechanical to high end machines
+  * Peter Laackmann, Marcus Janke
+https://www.researchgate.net/publication/225357700_Novel_Deprocessing_Technique_for_Failure_Analysis_of_Flip-Chip_Integrated_Circuit_Packages
+  * Novel Deprocessing Technique for Failure Analysis of Flip-Chip Integrated Circuit Packages