Silicon Pr0n

User Tools

Site Tools

Trace: • microscope
recap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
recap [2016/12/23 18:57] – mcmasterrecap [2016/12/23 18:58] (current) – mcmaster
Line 2: Line 2:
  
 Some options: Some options:
-  * Tape over cavity: current standard practice.  Use Kapton +  * Tape over cavity: current standard practice.  Use Kapton.  When wrapped fully around is very strong 
-  * Slide coverglass glued to top: probably a good long term solution+  * Slide coverglass glued to top: probably a good long term solution.  CA glue allows later removal
   * Nail polish: dries slowly.  Would need to be applied in thin layers.  Otherwise, think its pretty inert?   * Nail polish: dries slowly.  Would need to be applied in thin layers.  Otherwise, think its pretty inert?
   * Hot glue: CTE might destroy bond wires   * Hot glue: CTE might destroy bond wires
  
recap.1482519478.txt.gz · Last modified: 2016/12/23 18:57 by mcmaster