Differences

This shows you the differences between two versions of the page.

--- tutorial:start [2017/10/25 03:47] – [Image Analysis] mcmaster
+++ tutorial:start [2021/12/24 22:29] (current) – [Probing] mcmaster
@@ Line 1: / Line 1: @@
 This page is an index of articles describing procedures in detail, illustrated by photos from contributors' laboratories. The level of background knowledge required may vary and not all tutorials are complete; many are still evolving.
+[[mcu_security|MCU security series]]
 ====== Decapsulation ======
@@ Line 6: / Line 9: @@
   * [[Tutorial on epoxy decapsulation|Epoxy decapsulation for live analysis]]
     * Heated 70% nitric acid + dropper
-  * [[Tutorial on funneled 70% nitric acid epoxy decapsulation for live analysis using|Epoxy decapsulation for live analysis]]
-    * Heated 70% nitric acid + funnel
   * [[Tutorial on silver plated copper decapsulation|Silver plated copper decapsulation]]
     * Isolate the epoxy covered die from the majority carrier
@@ Line 22: / Line 23: @@
 ====== Probing ======
-  * [[Tutorial on using micropositioners|Using micropositioners]]
+  * [[https://microwiki.org/wiki/index.php/Tutorial_on_using_micropositioners|Using micropositioners]]
     * Probing ICs for live analysis
-  * [[Tutorial on making bond wire probes|Making bond wire probes]]
+  * [[https://microwiki.org/wiki/index.php/Tutorial_on_making_bond_wire_probes|Making bond wire probes]]
     * Too cheap to buy precision probe tips? Use bond wires. **This article is obsolete, the method described in the article below gives much better results.**
-  * [[Tutorial on etching tungsten probes|Etching tungsten probes]]
+  * [[https://microwiki.org/wiki/index.php/Tutorial_on_etching_tungsten_probes|Etching tungsten probes]]
     * This is how most real probe tips are made.
@@ Line 37: / Line 38: @@
   * [[http://www.sparkfun.com/commerce/news.php?id ======384|SparkFun ATmega slug decapsulation]]
     * RFNA + heat epoxy decapsulation
+  * [[http://blog.dragonsector.pl/2017/10/pwn2win-2017-shift-register.html|pwr2own layout CTF]]