chemical:acetone
This is an old revision of the document!
Table of Contents
Applications
Die cleaning
Suppliers
Hardware store is fine for general rinsing but tends not to be optical quality when preparing a sample for imaging. This is usually seen as streaks or small particles on the die.
DudaDiesel sells acetone that is sufficiently pure to clean dies for imaging (XXX: much better than hardware store but not clean enough. Rinse with distilled water)
Purity
Some problems during cleaning found traced to non-volatile residue. Question: what does it take to get acetone with very low non-volatile residue for cleaning? Alternatively, can I get another volatile compound, say IPA, that leaves less volatile residue?
| Source | Purity >= | Non-volatile residue ⇐ | CoA | $/L | Notes |
|---|---|---|---|---|---|
| Sigma Aldrich: CHROMASOLV®, for HPLC, ≥99.9% | 99.9 | 0.0002% | N | 36.25 (4L) | |
| Sigma Aldrich: semiconductor grade VLSI PURANAL™ (Honeywell 17617) | N/A | N/A | On request | ||
| VWR: Acetone, Semiconductor Grade, 99.5% | 99.5 | 5 ppm | N | 17.93 (4L) | |
| VWR: Acetone High Purity | 99.8 | 3.0mg/L max | Y | 138.30 (1L) | |
| Polysciences: Acetone, Glass Distilled, 99.7% | 99.7 | N/A | N | ||
| Polysciences: Acetone, 99.5% - EM grade | 99.5 | N/A | N | ||
| OmniSolv® Acetone | 99.5 | 1 ppm | N | ||
| HPLC Acetone 1 L | 99.9 | 3 ppm | 58.00 (1L) | ||
| EMD Millipore AX0118-2 Acetone, High Purity, Lab Grade, 1L Glass Bottle | |||||
| Acetone | 99.5 | 0.001 g/100 mL | Y | 8.50 (1L) | |
| KMG: Acetone Cleanroom LP | 1 ppm | Y | |||
| Acetone Production Grade VWR-BDH (A)06080903 | 99.97 | 0.001% | Y | ||
| HPLC Grade ACS, Spectrophotometric Grade ACS, Reagent Grade ACS | 99.97 | 5 ppm |
chemical/acetone.1370586451.txt.gz · Last modified: 2013/10/20 14:59 (external edit)