• 28 nm
• 40 nm
• 65 nm
• 90 nm
• 0.13 um
• 0.15 um
• 0.18 um
• 0.25 um
• 0.35 um
• 0.5 um
• 0.6 um
• 8“ wafers

Mostly copper with thick aluminum on the top layer.

1.8V core with I/O up to 3.3V. Many mixed-signal devices will have an on-die LDO for generating 1.8 from 3.3 however higher end devices such as programmable logic typically expect an external 1.8V supply.

4-5 aluminum layers with tungsten vias, titanium-based barrier metal, and cobalt silicide contacts.

Partial design rules and FIB sections at http://siliconexposed.blogspot.com/2014/02/process-overview-umc-180nm-envm.html

Power ring and pad layouts can vary somewhat, as does presence or absence of CMP filler between bond pads.

On-die Flash option available.

The CMP filler pattern is distinctive and can be used as positive ID.

CMP fill pattern table (measured from XC2C32A)