Differences

This shows you the differences between two versions of the page.

--- klinger:ut100 [2018/08/25 00:52] – mcmaster
+++ klinger:ut100 [2025/08/04 21:23] (current) – external edit 127.0.0.1
@@ Line 6: / Line 6: @@
 McMaster inventory 2018-08-15
-  * 1x UE30/50mm: original pr0nscope y stage, probably moderately worn gears
+  * 1x UE30/50mm: original prawnscope y stage, probably moderately worn gears
   * 1x UE30/50mm: bad shaft coupling
   * 1x UE30/50mm: bad shaft coupling (trashed a few years back)
   * 2x UE72/50mm: on order
-  * 2x UE30/50mm: drop in pr0nscope replacement
+  * 2x UE30/50mm: drop in prawnscope replacement
 ====== Bolt pattern ======
@@ Line 52: / Line 52: @@
 Above: removing encoder. Middle picture shows encoder disk holder, although encoder disk has fallen off
-pr0nscope attached an MDrive17 stepper to the encoder by doing the following:
+prawnscope attached an MDrive17 stepper to the encoder by doing the following:
   * Used a scrapped MDrive17 for brackets
   * Unbolt encoder cover
@@ Line 107: / Line 107: @@
 ^ Unit ^ Travel (mm) ^ Motor ^ Notes ^
-| 1 | 50 | UE-30PP | pr0nscope X, sheared coupler |
+| 1 | 50 | UE-30PP | prawnscope X, sheared coupler |
-| 2 | 50 | UE-30PP | pr0nscope Y |
+| 2 | 50 | UE-30PP | prawnscope Y |
 | 3 | 50 | UE-30PP | Broke years ago, threw out |
 | 4 | 50 | UE-30PP |  |