This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | Next revisionBoth sides next revision | ||
equipment:heatgun [2013/09/21 21:35] – mcmaster | equipment:heatgun [2013/10/03 04:27] – mcmaster | ||
---|---|---|---|
Line 6: | Line 6: | ||
====== Fume extraction ====== | ====== Fume extraction ====== | ||
- | As long as the PCB is heated evenly and kept below soldering temperatures it should not produce too much fumes. | + | As long as the PCB is heated evenly and kept below soldering temperatures it should not produce too much fumes. |
- | |||
- | ===== PACE ===== | ||
- | |||
- | Tabletop fume extractors. | ||
- | |||
- | Models: | ||
- | * Arm-Evac 1: one of these on eBay...looks like it has power and an on/off switch. | ||
- | * Arm-Evac 50: vacuum cleaner like unit | ||
- | * Arm-Evac 105: small ducted unit | ||
- | * New: [[http:// | ||
- | * Arm-Evac 200: larger ducted unit. Seems to be pretty popular | ||
- | * New: [[http:// | ||
- | * 120VAC, 60Hz 3 Amps 230VAC, 50Hz 1.38 Amps | ||
- | * Two 75mm (3") dia inlets | ||
- | * General purpose filter: Single Inlet: 288 m3/h (170 cfm); Dual Inlet: 170 m3/h (100 cfm) per inlet | ||
- | * Cleanroom filter: Single Inlet: 255 m3/h (150 cfm); Dual Inlet: 135 m3/h (80 cfm) per inlet | ||
- | * 58 dBA | ||
- | * Comparable to Hakko HJ3100 | ||
- | * "for 1-4 workstations" | ||
- | * Arm-Evac 250: like the 200 but with bells and whistles like filter change alarm | ||
- | * New: [[http:// | ||
- | * Arm-Evac 300: gray unit that looks a little different than the others | ||
- | * Arm-Evac 400: | ||
- | * "Free Blowing Flow Rate: 595 m3/h (350 cfm)" | ||
- | * "for 2-6 workstations" | ||
- | * Evac 500: has 3 feeds instead of 2 like the other units and of course more CFM | ||
- | * New [[http:// | ||
- | * Arm-Evac 1200 | ||
- | * "for 6-12 workstations" | ||
- | * Lab-Evac 150: kind of a mini fume hood for a fume extracted workstation | ||
- | |||
- | |||
- | |||
- | ===== Hakko ===== | ||
- | |||
- | * HJ3100 | ||
- | * Price: [[http:// | ||
- | * Seems distontinued, | ||
- | * 115VAC - 50/60 Hz, 3.5a, 350W | ||
- | * One Port: 100CFM (169 cu.m/h) | ||
- | * Two Ports: | ||
- | * 58dB | ||
- | * 11(W) x 9(D) x 18(H) in. | ||
- | * 27.94(W) x 22.86(D) x 45.72(H) cm | ||
- | * Approx. 18 lbs. (8.16 kgs) | ||
- | |||
- | |||
- | ===== Ace Industries ===== | ||
- | |||
- | |||
- | ===== Mixonix ===== | ||
- | |||
- | Models: | ||
- | * Mixonix FE-1200 | ||
- | |||
- | ===== Airfiltronix ===== | ||
- | |||
- | Models: | ||
- | * Scavenger HS3000 | ||
- | |||
- | |||
- | ===== Cygnus ===== | ||
- | |||
- | Cygnus Production Industries Fumex Model F001C 115V 3.5A60Hz 1PH Fume Extractor | ||
- | |||
- | |||
- | ====== References ====== | ||
- | |||
- | * http:// | ||