Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionNext revisionBoth sides next revision |
equipment:storage [2019/07/05 19:28] – [Repairing corroded pins] mcmaster | equipment:storage [2020/11/18 08:00] – [Table] mcmaster |
---|
^ Image ^ Vendor ^ Model ^ Size ^ Cell ^ Density lb/ft3 ^ Tensile Strength PSI ^ Color ^ mcmaster\\ bag ^ DIP usable? ^ Notes ^ | ^ Image ^ Vendor ^ Model ^ Size ^ Cell ^ Density lb/ft3 ^ Tensile Strength PSI ^ Color ^ mcmaster\\ bag ^ DIP usable? ^ Notes ^ |
| | All-Spec | [[https://www.all-spec.com/Catalog/Static-Control/ESD-Safe-Cushioning-Materials/ESD-Safe-Foams/713-2935|713-2935]] | 3/8 x 29 x 35" | Closed | 50kg/m³ | 515KPa | Black | Cut: 7-1/2 | Yes | "Non-staining, non-corrosive"\\ "Closed cell - non-absorbent" | | | | All-Spec | [[https://www.all-spec.com/Catalog/Static-Control/ESD-Safe-Cushioning-Materials/ESD-Safe-Foams/713-2935|713-2935]] | 3/8 x 29 x 35" | Closed | 50kg/m³ | 515KPa | Black | Cut: 7-1/2 | Yes | "Non-staining, non-corrosive"\\ "Closed cell - non-absorbent" | |
| | All-Spec | [[https://www.all-spec.com/Catalog/Static-Control/ESD-Safe-Cushioning-Materials/ESD-Safe-Foams/750-2436|750-2436]] | 1/2 x 24 x 36" | Closed | 1.8 pcf (28.8 kg/m3) | 31 PSI (215kPa) | Pink | Cut: 7-5/8 | Yes | | | | | All-Spec | [[https://www.all-spec.com/Catalog/Static-Control/ESD-Safe-Cushioning-Materials/ESD-Safe-Foams/750-2436|750-2436]] | 1/2 x 24 x 36" | Closed | 1.8 pcf (28.8 kg/m3) | 31 PSI (215kPa) | Pink | Cut: 7-5/8 | Yes | Ethafoam 180 as | |
| | Zoro | [[https://www.zoro.com/zoro-select-foam-sheet-36-l-36-w-38-pink-5gdc4/i/G1112921/|G1112921]] | 3/8 x 36 x 36" | Open | 1.4 lbs. cu. ft | 13 PSI | Pink | N/A | No: too soft | | | | | Zoro | [[https://www.zoro.com/zoro-select-foam-sheet-36-l-36-w-38-pink-5gdc4/i/G1112921/|G1112921]] | 3/8 x 36 x 36" | Open | 1.4 lbs. cu. ft | 13 PSI | Pink | N/A | No: too soft | | |
| |
3/8" (10 mm) thick seems to work well for putting DIPs on both sides. However, 1/2" (12mm) was easier to source at the time | 3/8" (10 mm) thick seems to work well for putting DIPs on both sides. However, 1/2" (12mm) was easier to source at the time |
| |
| {{:mcmaster:foam:cut_foam.jpg?400|}} |
| |
| mcmaster bags: U-Line S-3704 (pink, 8x8"). Fits nicely into divided boxes. |
| |
===== Degradation ===== | ===== Degradation ===== |