Silicon Pr0n

User Tools

Site Tools

Trace: • electrochemical • acetone • hno3 • storage • cnc • ceramic_metal • manufacture • removal • h2o2
chemical:hno3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
chemical:hno3 [2012/08/23 05:00] – mcmasterchemical:hno3 [2013/10/20 14:59] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +{{:chemical:hno3:first_rfna.jpg?200|}}
 +{{:chemical:hno3:minor_fuming.jpg?300|}}
 +
 +Left: RFNA.  Right: fuming nitric acid (forget if it was RFNA or WFNA)
 +
 +
 ====== Applications ====== ====== Applications ======
 Includes: Includes:
Line 9: Line 15:
 I've had the best luck storing it in actinic (tinted) glass with a PTFE stopper.  Although, I've only used the PTFE stoppers because it came with the bottles.  PTFE has a high CTE and a glass stopper would probably work better. I've had the best luck storing it in actinic (tinted) glass with a PTFE stopper.  Although, I've only used the PTFE stoppers because it came with the bottles.  PTFE has a high CTE and a glass stopper would probably work better.
  
-{{:chemical:hno3:rfna_clear_bottle.jpg?300|}}+{{:chemical:hno3:rfna_clear_bottle.jpg?200|}} 
 + 
 +Update: more recently I've been storing bulk WFNA in Nalgene PFA bottles with ETFE lids.  I was originally afraid that the WFNA would outgas and with a stopper there is a natural way to release pressure.  However, I haven't observed significant outgassing and thus this seems to be a superior way as its: 
 +  * Shatter resistant 
 +  * Spill resistant 
 +  * Seems to offer decent UV protection
  
 Standard glass seems to work decently but I found that it decomposed quicker.  If it was stored in a cabinet it should be fine. Standard glass seems to work decently but I found that it decomposed quicker.  If it was stored in a cabinet it should be fine.
Line 25: Line 36:
  
 I do not know of any US suppliers that will sell RFNA to the average joe. I do not know of any US suppliers that will sell RFNA to the average joe.
 +
 +
 +====== Safety ======
 +
 +HNO3 fumes are very strong and should not be inhaled or come in contact with skin.  RFNA especially releases NO2 fumes.
 +
 +Nitric acid dries out skin and turns it yellow.  Takes two or three weeks to heal completely.  Example of nearly healed / peeling thumb:
 +
 +{{:chemical:hno3:hno3_thumb_healing.jpg?300|}}
 +
 +I find that using a 3M full faceplate respirator helps enormously.
 +
 +
 +===== Gloves =====
 +
 +Both latex and nitrile is eaten by WFNA.  The areas of nitrile that aren't eaten completely eaten are weakened and must be replaced.  If fuming acid contacts latex/nitrile gloves, try to remove them quickly as it may eat through in a matter of a few seconds.  Likely the acid that makes it through won't be too strong but it will discolor skin and dry it out.
 +
 +Ultimately I use latex gloves because I often use acetone which rapidly eats nitrile gloves.  The above thumb picture was caused by acetone weakening a glove and subsequently causing nitric acid exposure.
 +
 +
 +===== Compatibility =====
 +
 +Always test materials for compatibility before assuming that it will play well with nitric acid, especially the fuming variety.  In general, oxidizers, organics, and bases react violently with concentrated nitric acid.  Some key materials:
 +  * Alcohol: reacts strongly, even at 70%
 +  * Acetone: less strong reaction than alcohol, but fuming will self heat leading to explosion
 +  * Nitrile: eats through
 +  * Latex: eats through
 +  * PTFE: teflon's nearly invincible so mostly no reaction.  However, some reactions self heat enough to cause it to decompose.  Particularly can be an issue when decapsulating ICs as it produces HF which is not only toxic but also etches the dies
  
  
chemical/hno3.1345698041.txt.gz · Last modified: 2013/10/20 14:59 (external edit)