Differences

This shows you the differences between two versions of the page.

--- fuse [2013/04/22 00:45] – created mcmaster
+++ fuse [2025/08/04 21:23] (current) – external edit 127.0.0.1
@@ Line 7: / Line 7: @@
 {{::fuse:nat_semi_dmpal16r_block_ns100x.jpg?300|}}
-Both the left and the bottom fuses are blow (non-conducting) but the upper right fuse is still conducting.
+Both the left and the bottom fuses are blown (non-conducting) but the upper right fuse is still conducting.
+https://www.researchgate.net/figure/a-Difference-between-before-and-after-program-of-a-TSMC-eFuse-structure-in-Qualcomm_fig5_334624423
 ====== Anti-fuse ======
 These are non-conductive until sufficient current flows through.  See Wikipedia for details.
+Seems like there's lots of kinds. Example pics:
+http://klabs.org/richcontent/fpga_content/Antifuse_Data/b4/unprogrammed_m2m_antifuse_b4.jpg
+http://klabs.org/richcontent/fpga_content/Antifuse_Data/b4/programmed_m2m_antifuse_b4.jpg
+http://klabs.org/richcontent/fpga_content/pages/notes/antifuse_notes.htm