tutorial:start
This is an old revision of the document!
Table of Contents
This page is an index of articles describing procedures in detail, illustrated by photos from contributors' laboratories. The level of background knowledge required may vary and not all tutorials are complete; many are still evolving.
Decapsulation
-
- Heated 70% nitric acid
-
- Heated 70% nitric acid + dropper
-
- Isolate the epoxy covered die from the majority carrier
Delayering
Image Analysis
-
- Manually convert an IC to vector graphics
Probing
-
- Probing ICs for live analysis
-
- Too cheap to buy precision probe tips? Use bond wires. This article is obsolete, the method described in the article below gives much better results.
-
- This is how most real probe tips are made.
External
- Cold, Labless HNO3 Decapping Procedure by Travis Goodspeed
- RFNA room temperature epoxy decapsulation
-
- Sulphuric acid epoxy decapsulation
-
- RFNA + heat epoxy decapsulation
tutorial/start.1525420414.txt.gz · Last modified: 2018/05/04 07:53 by mcmaster