Commercial decapsulation is increasingly done with automated machines. These typically spray hot nitric and / or sulphuric acid onto the chip. Usually they require special gaskets that are specific for each chip type. Many parts, such as the gasket, are made from PTFE.

Media

 
decap/auto.txt · Last modified: 2013/10/20 14:59 by 127.0.0.1
 
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution 4.0 International
Recent changes RSS feed Donate Powered by PHP Valid XHTML 1.0 Valid CSS Driven by DokuWiki